Package ptolemy.plot

Class Plot

java.lang.Object

java.awt.Component

java.awt.Container

javax.swing.JComponent

javax.swing.JPanel

ptolemy.plot.PlotBox

ptolemy.plot.Plot

All Implemented Interfaces:

java.awt.image.ImageObserver, java.awt.MenuContainer, java.awt.print.Printable, java.io.Serializable, javax.accessibility.Accessible, PlotBoxInterface, PlotInterface

Direct Known Subclasses:

EditablePlot, PlotLive

public class Plot
extends PlotBox
implements PlotInterface

A flexible signal plotter. The plot can be configured and data can be provided either through a file with commands or through direct invocation of the public methods of the class.

When calling the public methods, in most cases the changes will not be visible until paintComponent() is called. To request that this be done, call repaint(). One exception is addPoint(), which makes the new point visible immediately if the plot is visible on the screen and addPoint() is called from the event dispatching thread.

This base class supports a simple file syntax that has largely been replaced by the XML-based PlotML syntax. To read a file or a URL in this older syntax, use the read() method. This older syntax contains any number commands, one per line. Unrecognized commands and commands with syntax errors are ignored. Comments are denoted by a line starting with a pound sign "#". The recognized commands include those supported by the base class, plus a few more. The commands are case insensitive, but are usually capitalized. The number of data sets to be plotted does not need to be specified. Data sets are added as needed. Each dataset can be optionally identified with color (see the base class) or with unique marks. The style of marks used to denote a data point is defined by one of the following commands:

 Marks: none
 Marks: points
 Marks: bigdots
 Marks: dots
 Marks: various
 Marks: pixels
 

Here, "points" are small dots, while "dots" are larger. If "various" is specified, then unique marks are used for the first ten data sets, and then recycled. If "pixels" are specified, then each point is drawn as one pixel. Using no marks is useful when lines connect the points in a plot, which is done by default. However, if persistence is set, then you may want to choose "pixels" because the lines may overlap, resulting in annoying gaps in the drawn line. If the above directive appears before any DataSet directive, then it specifies the default for all data sets. If it appears after a DataSet directive, then it applies only to that data set.

To disable connecting lines, use:

 Lines: off
 

To reenable them, use

 Lines: on
 

You can control the line style on a per dataset basis by adding

 LineStyle: solid
 

Other supported line styles are "dotted", "dashed", "dotdashed" and "dotdotdashed". You can also specify "impulses", which are lines drawn from a plotted point down to the x axis. Plots with impulses are often called "stem plots." These are off by default, but can be turned on with the command:

 Impulses: on
 

or back off with the command

 Impulses: off
 

If that command appears before any DataSet directive, then the command applies to all data sets. Otherwise, it applies only to the current data set. To create a bar graph, turn off lines and use any of the following commands:

 Bars: on
 Bars: width
 Bars: width, offset
 

The width is a real number specifying the width of the bars in the units of the x axis. The offset is a real number specifying how much the bar of the i^th data set is offset from the previous one. This allows bars to "peek out" from behind the ones in front. Note that the frontmost data set will be the first one. To turn off bars, use

 Bars: off
 

To specify data to be plotted, start a data set with the following command:

 DataSet: string
 

Here, string is a label that will appear in the legend. It is not necessary to enclose the string in quotation marks. To start a new dataset without giving it a name, use:

 DataSet:
 

In this case, no item will appear in the legend. New datasets are plotted behind the previous ones. If the following directive occurs:

 ReuseDataSets: on
 

Then datasets with the same name will be merged. This makes it easier to combine multiple datafiles that contain the same datasets into one file. By default, this capability is turned off, so datasets with the same name are not merged. The data itself is given by a sequence of commands with one of the following forms:

 x, y
 draw: x, y
 move: x, y
 x, y, yLowErrorBar, yHighErrorBar
 draw: x, y, yLowErrorBar, yHighErrorBar
 move: x, y, yLowErrorBar, yHighErrorBar
 

The "draw" command is optional, so the first two forms are equivalent. The "move" command causes a break in connected points, if lines are being drawn between points. The numbers x and y are arbitrary numbers as supported by the Double parser in Java. If there are four numbers, then the last two numbers are assumed to be the lower and upper values for error bars. The numbers can be separated by commas, spaces or tabs.

Some of the methods, such as those that add points a plot, are executed in the event thread, possibly some time after they are called. If they are called from a thread different from the event thread, then the order in which changes to the plot take effect may be surprising. We recommend that any code you write that changes the plot in visible ways be executed in the event thread. You can accomplish this using the following template:

 Runnable doAction = new Runnable() {
 public void run() {
 ... make changes here (e.g. setMarksStyle()) ...
 }
 };
 synchronized (plot) {
     plot.deferIfNecessary(doAction);
 }
 

Note that deferIfNecessary() is not synchronized, but the caller of deferIfNecessary() should be synchronized on the Plot object.

This plotter has some limitations:

• If you zoom in far enough, the plot becomes unreliable. In particular, if the total extent of the plot is more than 2³² times extent of the visible area, quantization errors can result in displaying points or lines. Note that 2³² is over 4 billion.
• The limitations of the log axis facility are listed in the _gridInit() method in the PlotBox class.

Since:

Ptolemy II 0.2

Version:

$Id$

Author:

Edward A. Lee, Christopher Brooks, Contributor: Tom Peachey, Bert Rodiers

See Also:

Serialized Form

Pt.AcceptedRating:

Yellow (cxh)

Pt.ProposedRating:

Yellow (cxh)

Nested Class Summary

Nested classes/interfaces inherited from class ptolemy.plot.PlotBox

PlotBox.DragListener, PlotBox.MoveListener, PlotBox.MoveMotionListener, PlotBox.ZoomListener, PlotBox.ZoomListener2

Nested classes/interfaces inherited from class javax.swing.JPanel

javax.swing.JPanel.AccessibleJPanel

Nested classes/interfaces inherited from class javax.swing.JComponent

javax.swing.JComponent.AccessibleJComponent

Nested classes/interfaces inherited from class java.awt.Container

java.awt.Container.AccessibleAWTContainer

Nested classes/interfaces inherited from class java.awt.Component

java.awt.Component.AccessibleAWTComponent, java.awt.Component.BaselineResizeBehavior, java.awt.Component.BltBufferStrategy, java.awt.Component.FlipBufferStrategy

Field Summary

Fields

Modifier and Type	Field	Description
protected int	_currentdataset	The current dataset.
protected int	_marks	An indicator of the marks style.
protected java.util.ArrayList<java.util.ArrayList<PlotPoint>>	_points	A vector of datasets.

Fields inherited from class ptolemy.plot.PlotBox

_background, _bottomPadding, _colors, _documentBase, _foreground, _grid, _height, _leftPadding, _LOG10SCALE, _lrx, _lry, _padding, _plotImage, _preferredHeight, _preferredWidth, _rangesGivenByZooming, _rightPadding, _specifiedPlotRectangle, _topPadding, _ulx, _uly, _usecolor, _wrap, _wrapHigh, _wrapLow, _xBottom, _xhighgiven, _xlog, _xlowgiven, _xMax, _xMin, _xRangeGiven, _xscale, _xTop, _yBottom, _yhighgiven, _ylog, _ylowgiven, _yMax, _yMin, _yRangeGiven, _yscale, _yTop, PTPLOT_RELEASE

Fields inherited from class javax.swing.JComponent

listenerList, TOOL_TIP_TEXT_KEY, ui, UNDEFINED_CONDITION, WHEN_ANCESTOR_OF_FOCUSED_COMPONENT, WHEN_FOCUSED, WHEN_IN_FOCUSED_WINDOW

Fields inherited from class java.awt.Component

accessibleContext, BOTTOM_ALIGNMENT, CENTER_ALIGNMENT, LEFT_ALIGNMENT, RIGHT_ALIGNMENT, TOP_ALIGNMENT

Fields inherited from interface java.awt.image.ImageObserver

ABORT, ALLBITS, ERROR, FRAMEBITS, HEIGHT, PROPERTIES, SOMEBITS, WIDTH

Fields inherited from interface java.awt.print.Printable

NO_SUCH_PAGE, PAGE_EXISTS

Constructor Summary

Constructors

Constructor	Description
Plot()

Method Summary

Modifier and Type	Method	Description
protected void	_checkDatasetIndex(int dataset)	Check the argument to ensure that it is a valid data set index.
protected void	_drawBar(java.awt.Graphics graphics, int dataset, long xpos, long ypos, boolean clip)	Draw bar from the specified point to the y axis.
protected void	_drawErrorBar(java.awt.Graphics graphics, int dataset, long xpos, long yLowEBPos, long yHighEBPos, boolean clip)	Draw an error bar for the specified yLowEB and yHighEB values.
protected void	_drawImpulse(java.awt.Graphics graphics, long xpos, long ypos, boolean clip)	Draw a line from the specified point to the y axis.
protected void	_drawLine(java.awt.Graphics graphics, int dataset, long startx, long starty, long endx, long endy, boolean clip)	Draw a line from the specified starting point to the specified ending point.
protected void	_drawLine(java.awt.Graphics graphics, int dataset, long startx, long starty, long endx, long endy, boolean clip, float width)	Draw a line from the specified starting point to the specified ending point.
protected void	_drawPlot(java.awt.Graphics graphics, boolean clearfirst, java.awt.Rectangle drawRectangle)	Draw the axes and then plot all points.
protected void	_drawPoint(java.awt.Graphics graphics, int dataset, long xpos, long ypos, boolean clip)	Put a mark corresponding to the specified dataset at the specified x and y position.
protected java.lang.String	_exportLatexPlotData()	Return Latex plot data.
protected boolean	_parseLine(java.lang.String line)	Parse a line that gives plotting information.
protected void	_resetScheduledTasks()	Reset a scheduled redraw tasks.
protected void	_scheduledRedraw()	Perform a scheduled redraw.
protected void	_setWidth(java.awt.Graphics graphics, float width)	If the graphics argument is an instance of Graphics2D, then set the current stroke to the specified width.
protected void	_writeOldSyntax(java.io.PrintWriter output)	Deprecated.
void	addLegend(int dataset, java.lang.String legend)	Add a legend (displayed at the upper right) for the specified data set with the specified string.
void	addPoint(int dataset, double x, double y, double[] derivatives, boolean connected)	In the specified data set, add the specified x, y point to the plot.
void	addPointWithErrorBars(int dataset, double x, double y, double[] derivatives, double yLowEB, double yHighEB, boolean connected)	In the specified data set, add the specified x, y point to the plot with error bars.
void	clear(boolean format)	Clear the plot of all data points.
void	clear(int dataset)	Clear the plot of data points in the specified dataset.
void	erasePoint(int dataset, int index)	Erase the point at the given index in the given dataset.
void	fillPlot()	Rescale so that the data that is currently plotted just fits.
boolean	getConnected()	Return whether the default is to connect subsequent points with a line.
boolean	getImpulses()	Return whether a line will be drawn from any plotted point down to the x axis.
boolean	getLineStyles()	Return false if setLineStyles() has not yet been called or if setLineStyles(false) has been called, which signifies that different line styles are not to be used.
java.lang.String	getMarksStyle()	Get the marks style, which is one of "none", "points", "dots", or "various".
int	getMaxDataSets()	Deprecated.
int	getNumDataSets()	Return the actual number of data sets.
boolean	getReuseDatasets()	Return false if setReuseDatasets() has not yet been called or if setReuseDatasets(false) has been called.
void	markDisconnections(boolean value)	Mark the disconnections with a Dot in case value equals true, otherwise these points are not marked.
void	parseFile(java.lang.String filespec, java.net.URL documentBase)	Deprecated.
void	read(java.io.InputStream inputStream)	Read a file with the old syntax (non-XML).
void	samplePlot()	Create a sample plot.
void	setBars(boolean on)	Turn bars on or off (for bar charts).
void	setBars(double width, double offset)	Turn bars on and set the width and offset.
void	setConnected(boolean on)	If the argument is true, then the default is to connect subsequent points with a line.
void	setConnected(boolean on, int dataset)	If the first argument is true, then by default for the specified dataset, points will be connected by a line.
void	setImpulses(boolean on)	If the argument is true, then a line will be drawn from any plotted point down to the x axis.
void	setImpulses(boolean on, int dataset)	If the first argument is true, then a line will be drawn from any plotted point in the specified dataset down to the x axis.
void	setLineStyle(java.lang.String styleString, int dataset)	Set the style of the lines joining marks.
void	setLineStyles(boolean lineStyles)	If the argument is true, draw the data sets with different line styles.
void	setMarksStyle(java.lang.String style)	Set the marks style to "none", "points", "dots", or "various".
void	setMarksStyle(java.lang.String style, int dataset)	Set the marks style to "none", "points", "dots", "various", or "pixels" for the specified dataset.
void	setNumSets(int numSets)	Deprecated.
void	setPointsPersistence(int persistence)	Calling this method with a positive argument sets the persistence of the plot to the given number of points.
void	setReuseDatasets(boolean on)	If the argument is true, then datasets with the same name are merged into a single dataset.
void	setXPersistence(double persistence)	Calling this method with a positive argument sets the persistence of the plot to the given width in units of the horizontal axis.
void	writeData(java.io.PrintWriter output)	Write plot data information to the specified output stream in PlotML.
void	writeFormat(java.io.PrintWriter output)	Write plot format information to the specified output stream in PlotML, an XML scheme.

Methods inherited from class ptolemy.plot.PlotBox

_automaticRescale, _drawPlot, _help, _setButtonsVisibility, _setPadding, _timedRepaint, addCaptionLine, addXTick, addYTick, clearCaptions, clearLegends, deferIfNecessary, destroy, export, exportImage, exportImage, exportImage, exportImage, exportImage, exportLatex, getCaptions, getColor, getColorByName, getColors, getDataurl, getDocumentBase, getGrid, getLegend, getLegendDataset, getPlotRectangle, getPreferredSize, getTitle, getXAutoRange, getXLabel, getXLog, getXRange, getXTicks, getYAutoRange, getYLabel, getYLog, getYRange, getYTicks, init, paintComponent, parseFile, print, read, removeLegend, renameLegend, resetAxes, setAutomaticRescale, setBackground, setBackground, setBounds, setButtons, setCaptions, setColor, setColors, setColors, setDataurl, setDocumentBase, setForeground, setForeground, setGrid, setLabelFont, setPlotRectangle, setPlotRectangle, setSize, setTimedRepaint, setTitle, setTitleFont, setWrap, setXLabel, setXLog, setXRange, setYLabel, setYLog, setYRange, write, write, write, writeOldSyntax, zoom, zoomEqual

Methods inherited from class javax.swing.JPanel

getAccessibleContext, getUI, getUIClassID, paramString, setUI, updateUI

Methods inherited from class javax.swing.JComponent

addAncestorListener, addNotify, addVetoableChangeListener, computeVisibleRect, contains, createToolTip, disable, enable, firePropertyChange, firePropertyChange, firePropertyChange, fireVetoableChange, getActionForKeyStroke, getActionMap, getAlignmentX, getAlignmentY, getAncestorListeners, getAutoscrolls, getBaseline, getBaselineResizeBehavior, getBorder, getBounds, getClientProperty, getComponentGraphics, getComponentPopupMenu, getConditionForKeyStroke, getDebugGraphicsOptions, getDefaultLocale, getFontMetrics, getGraphics, getHeight, getInheritsPopupMenu, getInputMap, getInputMap, getInputVerifier, getInsets, getInsets, getListeners, getLocation, getMaximumSize, getMinimumSize, getNextFocusableComponent, getPopupLocation, getRegisteredKeyStrokes, getRootPane, getSize, getToolTipLocation, getToolTipText, getToolTipText, getTopLevelAncestor, getTransferHandler, getVerifyInputWhenFocusTarget, getVetoableChangeListeners, getVisibleRect, getWidth, getX, getY, grabFocus, hide, isDoubleBuffered, isLightweightComponent, isManagingFocus, isOpaque, isOptimizedDrawingEnabled, isPaintingForPrint, isPaintingOrigin, isPaintingTile, isRequestFocusEnabled, isValidateRoot, paint, paintBorder, paintChildren, paintImmediately, paintImmediately, print, printAll, printBorder, printChildren, printComponent, processComponentKeyEvent, processKeyBinding, processKeyEvent, processMouseEvent, processMouseMotionEvent, putClientProperty, registerKeyboardAction, registerKeyboardAction, removeAncestorListener, removeNotify, removeVetoableChangeListener, repaint, repaint, requestDefaultFocus, requestFocus, requestFocus, requestFocusInWindow, requestFocusInWindow, resetKeyboardActions, reshape, revalidate, scrollRectToVisible, setActionMap, setAlignmentX, setAlignmentY, setAutoscrolls, setBorder, setComponentPopupMenu, setDebugGraphicsOptions, setDefaultLocale, setDoubleBuffered, setEnabled, setFocusTraversalKeys, setFont, setInheritsPopupMenu, setInputMap, setInputVerifier, setMaximumSize, setMinimumSize, setNextFocusableComponent, setOpaque, setPreferredSize, setRequestFocusEnabled, setToolTipText, setTransferHandler, setUI, setVerifyInputWhenFocusTarget, setVisible, unregisterKeyboardAction, update

Methods inherited from class java.awt.Container

add, add, add, add, add, addContainerListener, addImpl, addPropertyChangeListener, addPropertyChangeListener, applyComponentOrientation, areFocusTraversalKeysSet, countComponents, deliverEvent, doLayout, findComponentAt, findComponentAt, getComponent, getComponentAt, getComponentAt, getComponentCount, getComponents, getComponentZOrder, getContainerListeners, getFocusTraversalKeys, getFocusTraversalPolicy, getLayout, getMousePosition, insets, invalidate, isAncestorOf, isFocusCycleRoot, isFocusCycleRoot, isFocusTraversalPolicyProvider, isFocusTraversalPolicySet, layout, list, list, locate, minimumSize, paintComponents, preferredSize, printComponents, processContainerEvent, processEvent, remove, remove, removeAll, removeContainerListener, setComponentZOrder, setFocusCycleRoot, setFocusTraversalPolicy, setFocusTraversalPolicyProvider, setLayout, transferFocusDownCycle, validate, validateTree

Methods inherited from class java.awt.Component

action, add, addComponentListener, addFocusListener, addHierarchyBoundsListener, addHierarchyListener, addInputMethodListener, addKeyListener, addMouseListener, addMouseMotionListener, addMouseWheelListener, bounds, checkImage, checkImage, coalesceEvents, contains, createImage, createImage, createVolatileImage, createVolatileImage, disableEvents, dispatchEvent, enable, enableEvents, enableInputMethods, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, firePropertyChange, getBackground, getBounds, getColorModel, getComponentListeners, getComponentOrientation, getCursor, getDropTarget, getFocusCycleRootAncestor, getFocusListeners, getFocusTraversalKeysEnabled, getFont, getForeground, getGraphicsConfiguration, getHierarchyBoundsListeners, getHierarchyListeners, getIgnoreRepaint, getInputContext, getInputMethodListeners, getInputMethodRequests, getKeyListeners, getLocale, getLocation, getLocationOnScreen, getMouseListeners, getMouseMotionListeners, getMousePosition, getMouseWheelListeners, getName, getParent, getPropertyChangeListeners, getPropertyChangeListeners, getSize, getToolkit, getTreeLock, gotFocus, handleEvent, hasFocus, imageUpdate, inside, isBackgroundSet, isCursorSet, isDisplayable, isEnabled, isFocusable, isFocusOwner, isFocusTraversable, isFontSet, isForegroundSet, isLightweight, isMaximumSizeSet, isMinimumSizeSet, isPreferredSizeSet, isShowing, isValid, isVisible, keyDown, keyUp, list, list, list, location, lostFocus, mouseDown, mouseDrag, mouseEnter, mouseExit, mouseMove, mouseUp, move, nextFocus, paintAll, postEvent, prepareImage, prepareImage, processComponentEvent, processFocusEvent, processHierarchyBoundsEvent, processHierarchyEvent, processInputMethodEvent, processMouseWheelEvent, remove, removeComponentListener, removeFocusListener, removeHierarchyBoundsListener, removeHierarchyListener, removeInputMethodListener, removeKeyListener, removeMouseListener, removeMouseMotionListener, removeMouseWheelListener, removePropertyChangeListener, removePropertyChangeListener, repaint, repaint, repaint, requestFocus, requestFocus, requestFocusInWindow, resize, resize, setBounds, setComponentOrientation, setCursor, setDropTarget, setFocusable, setFocusTraversalKeysEnabled, setIgnoreRepaint, setLocale, setLocation, setLocation, setMixingCutoutShape, setName, setSize, show, show, size, toString, transferFocus, transferFocusBackward, transferFocusUpCycle

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface ptolemy.plot.PlotBoxInterface

addCaptionLine, addXTick, addYTick, clearCaptions, clearLegends, deferIfNecessary, destroy, getCaptions, getColor, getColors, getDataurl, getDocumentBase, getGrid, getLegend, getLegendDataset, getPlotRectangle, getTitle, getXAutoRange, getXLabel, getXLog, getXRange, getXTicks, getYAutoRange, getYLabel, getYLog, getYRange, getYTicks, init, parseFile, read, removeLegend, renameLegend, repaint, resetAxes, setAutomaticRescale, setBackground, setButtons, setCaptions, setColor, setColors, setDataurl, setDocumentBase, setForeground, setGrid, setLabelFont, setPlotRectangle, setSize, setTimedRepaint, setTitle, setTitleFont, setWrap, setXLabel, setXLog, setXRange, setYLabel, setYLog, setYRange, write, write, write, writeOldSyntax, zoom

Methods inherited from interface ptolemy.plot.PlotInterface

addPoint

Field Detail

_currentdataset

protected int _currentdataset

The current dataset.

_marks

protected volatile int _marks

An indicator of the marks style. See _parseLine method for interpretation.

_points

protected java.util.ArrayList<java.util.ArrayList<PlotPoint>> _points

A vector of datasets.

Constructor Detail

Plot

public Plot()

Method Detail

addLegend

public void addLegend(int dataset,
                      java.lang.String legend)

Add a legend (displayed at the upper right) for the specified data set with the specified string. Short strings generally fit better than long strings.

Specified by:

addLegend in interface PlotBoxInterface

Specified by:

addLegend in interface PlotInterface

Overrides:

addLegend in class PlotBox

Parameters:

dataset - The dataset index.

legend - The label for the dataset.

See Also:

PlotBox.renameLegend(int, String)

addPoint

public void addPoint(int dataset,
                     double x,
                     double y,
                     double[] derivatives,
                     boolean connected)

In the specified data set, add the specified x, y point to the plot. Data set indices begin with zero. If the data set does not exist, create it. The fourth argument indicates whether the point should be connected by a line to the previous point. Regardless of the value of this argument, a line will not drawn if either there has been no previous point for this dataset or setConnected() has been called with a false argument.

In order to work well with swing and be thread safe, this method actually defers execution to the event dispatch thread, where all user interface actions are performed. Thus, the point will not be added immediately (unless you call this method from within the event dispatch thread). All the methods that do this deferring coordinate so that they are executed in the order that you called them.

Specified by:

addPoint in interface PlotInterface

Parameters:

dataset - The data set index.

x - The X position of the new point.

y - The Y position of the new point.

derivatives - The derivatives, if any.

connected - If true, a line is drawn to connect to the previous point.

addPointWithErrorBars

public void addPointWithErrorBars(int dataset,
                                  double x,
                                  double y,
                                  double[] derivatives,
                                  double yLowEB,
                                  double yHighEB,
                                  boolean connected)

In the specified data set, add the specified x, y point to the plot with error bars. Data set indices begin with zero. If the dataset does not exist, create it. yLowEB and yHighEB are the lower and upper error bars. The sixth argument indicates whether the point should be connected by a line to the previous point. The new point will be made visible if the plot is visible on the screen. Otherwise, it will be drawn the next time the plot is drawn on the screen. This method is based on a suggestion by Michael Altmann (michael@email.labmed.umn.edu).

In order to work well with swing and be thread safe, this method actually defers execution to the event dispatch thread, where all user interface actions are performed. Thus, the point will not be added immediately (unless you call this method from within the event dispatch thread). All the methods that do this deferring coordinate so that they are executed in the order that you called them.

Specified by:

addPointWithErrorBars in interface PlotInterface

Parameters:

dataset - The data set index.

x - The X position of the new point.

y - The Y position of the new point.

derivatives - The derivatives, if any.

yLowEB - The low point of the error bar.

yHighEB - The high point of the error bar.

connected - If true, a line is drawn to connect to the previous point.

clear

public void clear(boolean format)

Clear the plot of all data points. If the argument is true, then reset all parameters to their initial conditions, including the persistence, plotting format, and axes formats. For the change to take effect, you must call repaint().

Specified by:

clear in interface PlotBoxInterface

Specified by:

clear in interface PlotInterface

Overrides:

clear in class PlotBox

Parameters:

format - If true, clear the format controls as well.

In order to work well with swing and be thread safe, this method actually defers execution to the event dispatch thread, where all user interface actions are performed. Thus, the clear will not be executed immediately (unless you call this method from within the event dispatch thread). All the methods that do this deferring coordinate so that they are executed in the order that you called them.

clear

public void clear(int dataset)

Clear the plot of data points in the specified dataset. This calls repaint() to request an update of the display.

In order to work well with swing and be thread safe, this method actually defers execution to the event dispatch thread, where all user interface actions are performed. Thus, the point will not be added immediately (unless you call this method from within the event dispatch thread). If you call this method, the addPoint() method, and the erasePoint() method in any order, they are assured of being processed in the order that you called them.

Specified by:

clear in interface PlotInterface

Parameters:

dataset - The dataset to clear.

erasePoint

public void erasePoint(int dataset,
                       int index)

Erase the point at the given index in the given dataset. If lines are being drawn, these lines are erased and if necessary new ones will be drawn. The point is not checked to see whether it is in range, so care must be taken by the caller to ensure that it is.

In order to work well with swing and be thread safe, this method actually defers execution to the event dispatch thread, where all user interface actions are performed. Thus, the point will not be erased immediately (unless you call this method from within the event dispatch thread). All the methods that do this deferring coordinate so that they are executed in the order that you called them.

Specified by:

erasePoint in interface PlotInterface

Parameters:

dataset - The data set index.

index - The index of the point to erase.

fillPlot

public void fillPlot()

Rescale so that the data that is currently plotted just fits. This overrides the base class method to ensure that the protected variables _xBottom, _xTop, _yBottom, and _yTop are valid. This method calls repaint(), which eventually causes the display to be updated.

In order to work well with swing and be thread safe, this method actually defers execution to the event dispatch thread, where all user interface actions are performed. Thus, the fill will not occur immediately (unless you call this method from within the event dispatch thread). All the methods that do this deferring coordinate so that they are executed in the order that you called them.

Specified by:

fillPlot in interface PlotBoxInterface

Specified by:

fillPlot in interface PlotInterface

Overrides:

fillPlot in class PlotBox

getConnected

public boolean getConnected()

Return whether the default is to connect subsequent points with a line. If the result is false, then points are not connected. When points are by default connected, individual points can be not connected by giving the appropriate argument to addPoint(). Also, a different default can be set for each dataset, overriding this global default.

Specified by:

getConnected in interface PlotInterface

Returns:

True if points will be connected by default

See Also:

setConnected(boolean)

getImpulses

public boolean getImpulses()

Return whether a line will be drawn from any plotted point down to the x axis. A plot with such lines is also known as a stem plot.

Specified by:

getImpulses in interface PlotInterface

Returns:

True if this is an impulse plot

See Also:

setImpulses(boolean), setImpulses(boolean, int)

getLineStyles

public boolean getLineStyles()

Return false if setLineStyles() has not yet been called or if setLineStyles(false) has been called, which signifies that different line styles are not to be used. Otherwise, return true.

Specified by:

getLineStyles in interface PlotInterface

Returns:

True if line styles are to be used.

See Also:

setLineStyles(boolean)

getMarksStyle

public java.lang.String getMarksStyle()

Get the marks style, which is one of "none", "points", "dots", or "various".

Specified by:

getMarksStyle in interface PlotInterface

Returns:

A string specifying the style for points.

See Also:

setMarksStyle(java.lang.String)

getMaxDataSets

@Deprecated
public int getMaxDataSets()

Deprecated.

Return the maximum number of data sets. This method is deprecated, since there is no longer an upper bound.

Specified by:

getMaxDataSets in interface PlotInterface

Returns:

The maximum number of data sets

getNumDataSets

public int getNumDataSets()

Return the actual number of data sets.

Specified by:

getNumDataSets in interface PlotInterface

Returns:

The number of data sets that have been created.

getReuseDatasets

public boolean getReuseDatasets()

Return false if setReuseDatasets() has not yet been called or if setReuseDatasets(false) has been called.

Specified by:

getReuseDatasets in interface PlotInterface

Returns:

false if setReuseDatasets() has not yet been called or if setReuseDatasets(false) has been called.

Since:

Ptplot 5.3

See Also:

setReuseDatasets(boolean)

parseFile

@Deprecated
public void parseFile(java.lang.String filespec,
                      java.net.URL documentBase)

Deprecated.

Override the base class to indicate that a new data set is being read. This method is deprecated. Use read() instead (to read the old file format) or one of the classes in the plotml package to read the new (XML) file format.

Specified by:

parseFile in interface PlotBoxInterface

Specified by:

parseFile in interface PlotInterface

Overrides:

parseFile in class PlotBox

Parameters:

filespec - The file to be read.

documentBase - The base of the URL

markDisconnections

public void markDisconnections(boolean value)

Mark the disconnections with a Dot in case value equals true, otherwise these points are not marked.

Specified by:

markDisconnections in interface PlotInterface

Parameters:

value - True when disconnections should be marked.

read

public void read(java.io.InputStream inputStream)
          throws java.io.IOException

Read a file with the old syntax (non-XML). Override the base class to register that we are reading a new data set.

Specified by:

read in interface PlotBoxInterface

Specified by:

read in interface PlotInterface

Overrides:

read in class PlotBox

Parameters:

inputStream - The input stream.

Throws:

java.io.IOException - If the stream cannot be read.

samplePlot

public void samplePlot()

Create a sample plot. This is not actually done immediately unless the calling thread is the event dispatch thread. Instead, it is deferred to the event dispatch thread. It is important that the calling thread not hold a synchronize lock on the Plot object, or deadlock will result (unless the calling thread is the event dispatch thread).

Specified by:

samplePlot in interface PlotBoxInterface

Specified by:

samplePlot in interface PlotInterface

Overrides:

samplePlot in class PlotBox

setBars

public void setBars(boolean on)

Turn bars on or off (for bar charts). Note that this is a global property, not per dataset.

Specified by:

setBars in interface PlotInterface

Parameters:

on - If true, turn bars on.

setBars

public void setBars(double width,
                    double offset)

Turn bars on and set the width and offset. Both are specified in units of the x axis. The offset is the amount by which the i ^th data set is shifted to the right, so that it peeks out from behind the earlier data sets.

Specified by:

setBars in interface PlotInterface

Parameters:

width - The width of the bars.

offset - The offset per data set.

setConnected

public void setConnected(boolean on)

If the argument is true, then the default is to connect subsequent points with a line. If the argument is false, then points are not connected. When points are by default connected, individual points can be not connected by giving the appropriate argument to addPoint(). Also, a different default can be set for each dataset, overriding this global default. setConnected will also change the behavior of points that were already drawn if the graph is redrawn. If it isn't the points are not touched. If you change back the setConnected state, the again see what was visible before.

Specified by:

setConnected in interface PlotInterface

Parameters:

on - If true, draw lines between points.

See Also:

setConnected(boolean, int), getConnected()

setConnected

public void setConnected(boolean on,
                         int dataset)

If the first argument is true, then by default for the specified dataset, points will be connected by a line. Otherwise, the points will not be connected. When points are by default connected, individual points can be not connected by giving the appropriate argument to addPoint(). Note that this method should be called before adding any points. Note further that this method should probably be called from the event thread.

Specified by:

setConnected in interface PlotInterface

Parameters:

on - If true, draw lines between points.

dataset - The dataset to which this should apply.

See Also:

setConnected(boolean), getConnected()

setImpulses

public void setImpulses(boolean on)

If the argument is true, then a line will be drawn from any plotted point down to the x axis. Otherwise, this feature is disabled. A plot with such lines is also known as a stem plot.

Specified by:

setImpulses in interface PlotInterface

Parameters:

on - If true, draw a stem plot.

See Also:

getImpulses()

setImpulses

public void setImpulses(boolean on,
                        int dataset)

If the first argument is true, then a line will be drawn from any plotted point in the specified dataset down to the x axis. Otherwise, this feature is disabled. A plot with such lines is also known as a stem plot.

Specified by:

setImpulses in interface PlotInterface

Parameters:

on - If true, draw a stem plot.

dataset - The dataset to which this should apply.

See Also:

getImpulses()

setLineStyle

public void setLineStyle(java.lang.String styleString,
                         int dataset)

Set the style of the lines joining marks.

Specified by:

setLineStyle in interface PlotInterface

Parameters:

styleString - A string specifying the color for points. The following styles are permitted: "solid", "dotted", "dashed", "dotdashed", "dotdotdashed".

dataset - The data set index.

setLineStyles

public void setLineStyles(boolean lineStyles)

If the argument is true, draw the data sets with different line styles. Otherwise, use one line style.

Specified by:

setLineStyles in interface PlotInterface

Parameters:

lineStyles - True if the data sets are to be drawn in different line styles.

See Also:

getLineStyles()

setMarksStyle

public void setMarksStyle(java.lang.String style)

Set the marks style to "none", "points", "dots", or "various". In the last case, unique marks are used for the first ten data sets, then recycled. This method should be called only from the event dispatch thread.

Specified by:

setMarksStyle in interface PlotInterface

Parameters:

style - A string specifying the style for points.

See Also:

getMarksStyle()

setMarksStyle

public void setMarksStyle(java.lang.String style,
                          int dataset)

Set the marks style to "none", "points", "dots", "various", or "pixels" for the specified dataset. In the last case, unique marks are used for the first ten data sets, then recycled.

Specified by:

setMarksStyle in interface PlotInterface

Parameters:

style - A string specifying the style for points.

dataset - The dataset to which this should apply.

See Also:

getMarksStyle()

setNumSets

@Deprecated
public void setNumSets(int numSets)

Deprecated.

Specify the number of data sets to be plotted together. This method is deprecated, since it is no longer necessary to specify the number of data sets ahead of time.

Specified by:

setNumSets in interface PlotInterface

Parameters:

numSets - The number of data sets.

setPointsPersistence

public void setPointsPersistence(int persistence)

Calling this method with a positive argument sets the persistence of the plot to the given number of points. Calling with a zero argument turns off this feature, reverting to infinite memory (unless sweeps persistence is set). If both sweeps and points persistence are set then sweeps take precedence.

Setting the persistence greater than zero forces the plot to be drawn in XOR mode, which allows points to be quickly and efficiently erased. However, there is a bug in Java (as of version 1.3), where XOR mode does not work correctly with double buffering. Thus, if you call this with an argument greater than zero, then we turn off double buffering for this panel and all of its parents. This actually happens on the next call to addPoint().

Specified by:

setPointsPersistence in interface PlotInterface

Parameters:

persistence - Number of points to persist for.

setReuseDatasets

public void setReuseDatasets(boolean on)

If the argument is true, then datasets with the same name are merged into a single dataset.

Specified by:

setReuseDatasets in interface PlotInterface

Parameters:

on - If true, then merge datasets.

See Also:

getReuseDatasets()

setXPersistence

public void setXPersistence(double persistence)

Calling this method with a positive argument sets the persistence of the plot to the given width in units of the horizontal axis. Calling with a zero argument turns off this feature, reverting to infinite memory (unless points persistence is set). If both X and points persistence are set then both are applied, meaning that points that are old by either criterion will be erased.

Setting the X persistence greater than zero forces the plot to be drawn in XOR mode, which allows points to be quickly and efficiently erased. However, there is a bug in Java (as of version 1.3), where XOR mode does not work correctly with double buffering. Thus, if you call this with an argument greater than zero, then we turn off double buffering for this panel and all of its parents. This actually happens on the next call to addPoint().

Specified by:

setXPersistence in interface PlotInterface

Parameters:

persistence - Persistence in units of the horizontal axis.

writeData

public void writeData(java.io.PrintWriter output)

Write plot data information to the specified output stream in PlotML.

Specified by:

writeData in interface PlotBoxInterface

Specified by:

writeData in interface PlotInterface

Overrides:

writeData in class PlotBox

Parameters:

output - A buffered print writer.

writeFormat

public void writeFormat(java.io.PrintWriter output)

Write plot format information to the specified output stream in PlotML, an XML scheme.

Specified by:

writeFormat in interface PlotBoxInterface

Specified by:

writeFormat in interface PlotInterface

Overrides:

writeFormat in class PlotBox

Parameters:

output - A buffered print writer.

_checkDatasetIndex

protected void _checkDatasetIndex(int dataset)

Check the argument to ensure that it is a valid data set index. If it is less than zero, throw an IllegalArgumentException (which is a runtime exception). If it does not refer to an existing data set, then fill out the _points Vector so that it does refer to an existing data set. All other dataset-related vectors are similarly filled out.

Parameters:

dataset - The data set index.

_drawBar

protected void _drawBar(java.awt.Graphics graphics,
                        int dataset,
                        long xpos,
                        long ypos,
                        boolean clip)

Draw bar from the specified point to the y axis. If the specified point is below the y axis or outside the x range, do nothing. If the clip argument is true, then do not draw above the y range. Note that paintComponent() should be called before calling this method so that _xscale and _yscale are properly set. This method should be called only from the event dispatch thread. It is not synchronized, so its caller should be.

Parameters:

graphics - The graphics context.

dataset - The index of the dataset.

xpos - The x position.

ypos - The y position.

clip - If true, then do not draw outside the range.

_drawErrorBar

protected void _drawErrorBar(java.awt.Graphics graphics,
                             int dataset,
                             long xpos,
                             long yLowEBPos,
                             long yHighEBPos,
                             boolean clip)

Draw an error bar for the specified yLowEB and yHighEB values. If the specified point is below the y axis or outside the x range, do nothing. If the clip argument is true, then do not draw above the y range. This method should be called only from the event dispatch thread. It is not synchronized, so its caller should be.

Parameters:

graphics - The graphics context.

dataset - The index of the dataset.

xpos - The x position.

yLowEBPos - The lower y position of the error bar.

yHighEBPos - The upper y position of the error bar.

clip - If true, then do not draw above the range.

_drawImpulse

protected void _drawImpulse(java.awt.Graphics graphics,
                            long xpos,
                            long ypos,
                            boolean clip)

Draw a line from the specified point to the y axis. If the specified point is below the y axis or outside the x range, do nothing. If the clip argument is true, then do not draw above the y range. This method should be called only from the event dispatch thread. It is not synchronized, so its caller should be.

Parameters:

graphics - The graphics context.

xpos - The x position.

ypos - The y position.

clip - If true, then do not draw outside the range.

_drawLine

protected void _drawLine(java.awt.Graphics graphics,
                         int dataset,
                         long startx,
                         long starty,
                         long endx,
                         long endy,
                         boolean clip)

Draw a line from the specified starting point to the specified ending point. The current color is used. If the clip argument is true, then draw only that portion of the line that lies within the plotting rectangle. This method draws a line one pixel wide. This method should be called only from the event dispatch thread. It is not synchronized, so its caller should be.

Parameters:

graphics - The graphics context.

dataset - The index of the dataset.

startx - The starting x position.

starty - The starting y position.

endx - The ending x position.

endy - The ending y position.

clip - If true, then do not draw outside the range.

_drawLine

protected void _drawLine(java.awt.Graphics graphics,
                         int dataset,
                         long startx,
                         long starty,
                         long endx,
                         long endy,
                         boolean clip,
                         float width)

Draw a line from the specified starting point to the specified ending point. The current color is used. If the clip argument is true, then draw only that portion of the line that lies within the plotting rectangle. The width argument is ignored if the graphics argument is not an instance of Graphics2D. This method should be called only from the event dispatch thread. It is not synchronized, so its caller should be.

Parameters:

graphics - The graphics context.

dataset - The index of the dataset.

startx - The starting x position.

starty - The starting y position.

endx - The ending x position.

endy - The ending y position.

clip - If true, then do not draw outside the range.

width - The thickness of the line.

_drawPlot

protected void _drawPlot(java.awt.Graphics graphics,
                         boolean clearfirst,
                         java.awt.Rectangle drawRectangle)

Draw the axes and then plot all points. If the second argument is true, clear the display first. This method is called by paintComponent(). To cause it to be called you would normally call repaint(), which eventually causes paintComponent() to be called.

Note that this is synchronized so that points are not added by other threads while the drawing is occurring. This method should be called only from the event dispatch thread, consistent with swing policy.

Overrides:

_drawPlot in class PlotBox

Parameters:

graphics - The graphics context.

clearfirst - If true, clear the plot before proceeding.

drawRectangle - The Rectangle to draw in.

_drawPoint

protected void _drawPoint(java.awt.Graphics graphics,
                          int dataset,
                          long xpos,
                          long ypos,
                          boolean clip)

Put a mark corresponding to the specified dataset at the specified x and y position. The mark is drawn in the current color. What kind of mark is drawn depends on the _marks variable and the dataset argument. If the fourth argument is true, then check the range and plot only points that are in range. This method should be called only from the event dispatch thread. It is not synchronized, so its caller should be.

Overrides:

_drawPoint in class PlotBox

Parameters:

graphics - The graphics context.

dataset - The index of the dataset.

xpos - The x position.

ypos - The y position.

clip - If true, then do not draw outside the range.

_exportLatexPlotData

protected java.lang.String _exportLatexPlotData()

Return Latex plot data.

Overrides:

_exportLatexPlotData in class PlotBox

Returns:

A string suitable for inclusion in Latex.

_parseLine

protected boolean _parseLine(java.lang.String line)

Parse a line that gives plotting information. Return true if the line is recognized. Lines with syntax errors are ignored. It is not synchronized, so its caller should be.

Overrides:

_parseLine in class PlotBox

Parameters:

line - A command line.

Returns:

True if the line is recognized.

_resetScheduledTasks

protected void _resetScheduledTasks()

Reset a scheduled redraw tasks.

Overrides:

_resetScheduledTasks in class PlotBox

_scheduledRedraw

protected void _scheduledRedraw()

Perform a scheduled redraw.

Overrides:

_scheduledRedraw in class PlotBox

_setWidth

protected void _setWidth(java.awt.Graphics graphics,
                         float width)

If the graphics argument is an instance of Graphics2D, then set the current stroke to the specified width. Otherwise, do nothing.

Parameters:

graphics - The graphics object.

width - The width.

_writeOldSyntax

@Deprecated
protected void _writeOldSyntax(java.io.PrintWriter output)

Deprecated.

Write plot information to the specified output stream in the "old syntax," which predates PlotML. Derived classes should override this method to first call the parent class method, then add whatever additional information they wish to add to the stream. It is not synchronized, so its caller should be.

Overrides:

_writeOldSyntax in class PlotBox

Parameters:

output - A buffered print writer.